dr film machine is one of the necessary medical equipment Hospital Radiology, which is a silhouette of a digital X-ray film machine, not only low radiation dose, radiation on the human body is very small, but very high resolution, exposure imaging time is very short, effective to the patient so that the inspection rate significantly increased, reducing the patient waiting time. So, dr film operating precautions, what does? 1, start the operation to ensure that the device is not connected to a wall outlet. Main power is only used to charge the battery. 2, to comply with radiation safety regulations. 3. Turn off the computer when the device is turned off, and then turn off the power; not allowed to turn the power off the computer directly. 4, MOBILETT unused, always positioned to open the key to O. 5. Be careful cable. If the cable glue, do not yank. Re back in place after use detectors to ensure that sight again pointing to the outside. 6, prohibits the reduction of the radiation field adjustable dimmer than the need to examine large areas. 7, the digital mode, the exposure parameters can only be entered from the touch-screen monitor, and then automatically transferred to the generator monitor. Make sure before exposure value generator display is what you need. Digital mode, l2d5wer; this value can only be changed on the touch screen. Simulation mode (using the normal film cartridge) can also be modified on the generator display. 8, if there is no exposure within 15 seconds, automatically interrupt preparation links, display information ERR 25. 9, when the long-distance push device, imaging system must be shut down. 10, to avoid more than 10 ° slope, try to avoid potholes machine on uneven ground implementation. Welcome to visit the website to learn more Pulang medical healthcare industry capital, consulting For our products, you can call the customer service phone can focus our micro-channel, micro signal:. Perlongvip.